Commercial Laser Cutter for Fabric

Product Detail

▶ Commercial fabric cutting machine with laser

Technical Data

Working Area (W * L)	2500mm * 3000mm (98.4’’ *118’’)
Max Material Width	98.4’’
Software	Offline Software
Laser Power	150W/300W/450W
Laser Source	CO2 Glass Laser Tube or CO2 RF Metal Laser Tube
Mechanical Control System	Rack and Pinion Transmission & Servo Motor Drive
Working Table	Mild Steel Conveyor Working Table
Max Speed	1~600mm/s
Acceleration Speed	1000~6000mm/s2

Mechanical Structure

▶ High Efficiency & High Output

▶ Excellent Cutting Quality

▶ Safe & Stable Structure

R&D for Large Format Fabric Cutting

CO2 RF Laser Source - Option

Combines power, excellent beam quality, and nearly square wave pulses (9.2 / 10.4 / 10.6μm) for high processing efficiency and speed. With small heat-affected zone, plus compact, fully sealed, slab discharge construction for enhanced reliability. For some special industrial fabrics, RF Metal Laser Tube will be a better option.

Auto Feeding System

The Auto Feeder combined with the Conveyor Table is the ideal solution for series and mass production. It transports the flexible material (fabric most of the time) from the roll to the cutting process on the laser system. With stress-free material feeding, there is no material distortion while contactless cutting with laser ensures outstanding results.

Nesting Software

When you are trying to cut a whole lot of different designs and want to save material to the largest degree, Nesting Software will be a good choice for you. By selecting all the patterns you want to cut and setting the numbers of each piece, the software will nest these pieces with the most usage rate to save your cutting time and roll materials. Simply send the nesting markers to the Flatbed Laser Cutter 160, it will cut uninterruptedly without any further manual intervention.

Marker Pen Module

You can use the marker pen to make the marks on the cutting pieces, enabling the workers to sew easily. You can also use it to make special marks such as the serial number of the product, the size of the product, the manufacture date of the product, etc.

Ink-jet Print Module

It is widely used commercially for marking and coding products and packages. A high-pressure pump directs liquid ink from a reservoir through a gun body and a microscopic nozzle, creating a continuous stream of ink droplets via the Plateau-Rayleigh instability. Different inks are optional for specific fabrics.

Fabric Samples

◆ Cutting through the fabric at one time, no adhesion ◆ No thread residue, no burr ◆ Flexible cutting for any shapes and sizes Laser-friendly Fabrics:

nylon, aramid, Kevlar, denim, filter cloth, fiberglass, polyester, felt, EVA, coated fabric, etc.