| Working Area (W * L) | 400mm * 400mm (15.7” * 15.7”) |
| Beam Delivery | 3D Galvanometer |
| Laser Power | 180W/250W/500W |
| Laser Source | CO2 RF Metal Laser Tube |
| Mechanical System | Servo Driven, Belt Driven |
| Working Table | Honey Comb Working Table |
| Max Cutting Speed | 1~1000mm/s |
| Max Marking Speed | 1~10,000mm/s |
The red light indication system indicates the practical engraving position and path so as to accurately place the paper at the proper position. That's significant for accurate cutting and engraving.
For the galvo marking machine, we will install the side ventilation system to exhaust the fumes. The strong suction from the exhaust fan can absorb and dispel the fume and dust, avoiding cutting error and improper edge burning.
- For Printed Paper
CCD Camera can recognize the printed pattern and direct the laser to cut along the pattern outline.
Besides the general configuration, MimoWork provides the enclosed design as the upgrade scheme for the galvo laser marker. Details to check out the Galvo Laser Marker 80.
• Laser Power: 75W/100W
• Working Area: 400mm * 400mm
• Laser Power: 100W/150W/300W
• Working Area: 1600mm * 1000mm